Motorized 25-100
The circular shears in sizes KSE 25 - 100 are basically all motor-driven.
You can process blank diameters between 80 mm and 3,200 mm. The maximum sheet thickness can reach 10 mm. They meet the highest demands of industrially manufactured sheet metal by cutting and flanging.
The machines are driven in one, two or infinitely variable stages; on upper and lower shaft. The bracket adjustment is done manually.
The KSE 31 has a motorized knife feed. Operation takes place via an operator panel and a 3-way foot switch and, if required, a 2-hand control panel.
The KSE 60 also has a motorized bracket adjustment, diameter programming and operation via touchscreen and 3-way foot switch and, if required, 2-hand operation.
Optional:
- Inboard and outboard equipment
- Motorized handle adjustment
- Motorized knife feed
- Pneumatic hold-down device
- Pneumatic sheet clamping
|
Example sizes KSE 25-100 |
|
|
|
model |
CFE 25 |
KSE 31 |
KSE 60 |
CFE 100 |
|
Sheet thickness * [mm] |
2.5 |
4.0 |
6.0 |
10.0 |
|
Circle diameter max [mm] |
1000 |
1200 |
2000 |
3200 |
|
Throat [mm] |
350 |
280/500 |
280/500 |
750 |
* The sheet thickness refers to material with a tensile strength of 400 N / mm² and a yield point of 250 N / mm²!